CAN NOT DOWNLOAD THE DOWNLOAD V11.85
- Автор темы Laduck
- Дата начала
- Статус
Hello.
I have adapters with old boot and old product date. It works without reflash. I think problem with new product date
allnewauto
Member
enjoy my friends
other testing
other testing
allnewauto
Member
work with after 2020 11 production date
Проблема только для регистрации и прошивки новых шнуров. Не скачивается прошивка. Старые работает в штатном режиме.
I am asking people involved in the discussions to read what had been written before.
All devices that previously downloaded 11.85 firmware do work.
The problem is with OLD SN, OLD BOOT thinkdiag (which should work), and which are currently getting registered on the system, so for the first time.
The problem is up to the diagzone because it does not allow downloading of the DOWNLOAD file.
We are waiting for a response from the thinkdiag team 4 days
All devices that previously downloaded 11.85 firmware do work.
The problem is with OLD SN, OLD BOOT thinkdiag (which should work), and which are currently getting registered on the system, so for the first time.
The problem is up to the diagzone because it does not allow downloading of the DOWNLOAD file.
We are waiting for a response from the thinkdiag team 4 days
Cargadget
Member
я про это и говорю, новый адаптер все скачивается кроме прошивки,при первом подклюении ничего не обновляется естественно, НО сканер подключается и работает. Так же как выше по видео с еобд и мерседес. Может киты шьют их сразу под DZ? Продают то они их как сканеры которые точно будут работать с DZ.
Mr Allnew!
For me EOBD not works now with newly registered thindkiags.
All protocol failed. Checked on two of my cars. Before, with firmware updated thimkdiags this two cars always worked with EOBD via the CANBUS protocol. Now not work.
If i do activate thinkdiag, do you think the BRANDS will work ?
So now only EOBD not work without the vci firmware update, but the real brands will work you say ?
Anyway i think your TATA car in your video should work via the first protocol CANBUS, not the fourth the KWP FAST protocol, don't you think?
For me EOBD not works now with newly registered thindkiags.
All protocol failed. Checked on two of my cars. Before, with firmware updated thimkdiags this two cars always worked with EOBD via the CANBUS protocol. Now not work.
If i do activate thinkdiag, do you think the BRANDS will work ?
So now only EOBD not work without the vci firmware update, but the real brands will work you say ?
Anyway i think your TATA car in your video should work via the first protocol CANBUS, not the fourth the KWP FAST protocol, don't you think?
Вложения
Только что проверил, купил отдельно 1 марку Ауди, прошёл проверку, скачал, кроме прошивки, но продиагностировать не смог. Крутит крутит, и потом выдаёт ошибку, связи с ЭБУ. Но если через Thingdiag, всё работает.
we wrote above that the brands of cars work, without firmware of the device. But in fact THEY DO NOT WORK. I checked it on my car, and with a device that can not download the firmware
вчера скачал все марки, но не скачал прошивку 11.85, работает на WV, RENO, MB PEGUET, FORD. Но замечал одну изменение, если скачать и обновить адаптер до версии 11.85, то при выборе авто в меню проходит без задержки, а без обновления прого немножко зависает (примерно 20-30 секунд).
- Статус