Diagzone bramka Doip

A

antolakpawel

New member
Wtam mam pytanie czy program Diagzone obsługuje bramkę Doip???
DZisiaj chciałem polaczyc sie z Volvo XC 60 2023 i był problem. Posiadam thinkdiag 2.
 
Последнее редактирование:
doip is a protocol and not a gateway. thingdiag2 will only work with the doip protocol with a specific adapter cable. search for "doip cable dbscar7" you will find what you need.
 
Eiag Plus = thingdiag2 = Lançamento DBSCAR VII = Thinkcar TVCI = TOPDON ARTHLINK 100
All these interfaces are the same, have the same hardware and work with the same firmware. So I believe the cable will work. Someone needs to buy it and test it, right. I haven't tested it yet.
 
Kabel przejściowy, który łączy się normalnie a nie przez bluetooth.
Jest jeden problem, bo nikt nie chce powiedzieć czy działa z thinkdiag 2.
 
There are 2 DOIP adapters at launch: one with usb plug and another with obd2 adapter type. No one confirms anything, not even with the original software/interface that would work or that is recommended. So where you have cracked software and firmware is much more difficult to confirm.
 
I'll buy the cheapest adapter (USB)... then I'll test it... as I said before, someone will have to test it! However, it will take time... I believe it will only be in February for me to know for myself whether it works or not.
 
There is another cable that I want to buy and test... ethernet cable for bmw F series. I saw that Topdon uses a cable similar to Autel... I saw a video of a thinkcar user using the same cable and the interfaces were topdon Arthlink100 and Thinkcar TVCI
 
Для ответа нужно войти/зарегистрироваться
Назад
Верх